Call us now: 1-888-867-7995

Hardware

Standard rail end brackets - fencing

railEnd

Standard rail end brackets are used for attaching a fence panel directly to a structure, column, or post, without the use of an Ultra punched post.

Adjustable rail end brackets - fencing

Adjustable brackets are used when attaching a fence panel at an angle to an existing structure or column.

Wedge floor flange

Wedge Flange

The two-piece wedge floor flange is used to attach a post to a hard surface and requires assembly at time of installation. The flange "covers" cannot be used with the wedge floor flange. Available for 2" and 2-½" posts. For added strength and durability, choose the welded floor flange.

Welded floor flange

welded floor flange

The welded floor flange is used to attach a post to a hard surface. Floor flanges are factory welded to posts. The one- and two-piece flange "covers" can be used with the welded floor flange. Available for 2”, 2-½”, and 3” posts.

TruClose® hinges

TruClose hinge

TruClose® self-closing hinges are suitable for gates weighing up to 55 lbs with a maximum gate load up to 550 lbs. A must for pool fences. Available in residential and industrial grades. More information about the TruClose® hinge

Ultrahinge™

Revolutionary design using all-aluminum extrusion, mylar hinge blocks and j-bolts. Factory-welded to the gate frame, then bolt-mounted to a 4” post or greater.

MagnaLatch®

The MagnaLatch® meets BOCA code for self-latching gate latches and is usually required for any pool fencing installation. More information about the MagnaLatch®

LokkLatch® Magnetic

z latch

LokkLatch® Magnetic is a lockable, magnetic gate lock with dual security lock cylinders that allow you to open and lock from either side.

One-piece flange cover

One Piece Flange Cover

The one-piece flange cover adds a nice, clean look to your Ultra Fence™ by covering up welded floor flanges and unsightly bolts. The one-piece cover cannot be used with any modified or flush bottom rail Ultra Fence™. Available in 2” and 2-1/2”.

Two-piece flange cover

Two Piece Cover

The two-piece flange cover adds a nice clean look to your Ultra Fence™ by covering up welded floor flanges and unsightly bolts. The two-piece cover can be used with any standard, modified, or flush bottom rail Ultra Fence™. Available in 2” and 2-1/2”.

Standard aluminum hinge

Standard Aluminum Hinge

This sturdy aluminum hinge comes standard with each Ultra aluminum gate.

Standard LokkLatch®

Standard LokkLatch

LokkLatches® are key-lockable and are both vertically and horizontally adjustable. The self-locking latch is ideal for gates used on residential or commercial properties. Components are rust free.

Gatestop™

Gate Stop

The Gatestop™ is a great way to prevent damage to your hinges, latches, and gate. The rubber buffer reduces noise and protects against gate slam. Rust free. Available in 3-3/4" and 4-3/4".

Standard drop rod

Standard Drop Rod

The drop rod comes standard with each double gate. The rod is used to keep one side of the gate stationary when not in use. 18” length.

LokkBolt™ drop rod

Lokk Bolt Drop Rod

The LokkBolt™ is a key-lockable security drop-bolt that is used on a double gate. Available in 24” length.

Adjustable rail end brackets - railing

Adjustable Rail End

When railing sections need to be mounted on an angle, adjustable rail mounting brackets are ideal. Available in horizontal or vertical orientation.

Boss posts - railing

Boss Post

An innovative post design that allows railing accessories and Boss flanges to be attached.

Boss flange - railing

Boss Flange

A clean and hidden fastened flange used with Boss posts. Available for 2”, 2-1/2” and 3” Boss posts.


Hardware installed

  • Gatestop Installed Gatestop™
  • Ultra Hinge InstalledUltrahinge™